1. Surface Preparation

• Clean all wall surfaces to remove dust, oil, grease, and loose particles.

• Remove old flaking paint using appropriate methods (scraping, sanding, or chemical stripping if needed).

• Repair minor cracks, holes, or surface defects with putty or filler.

• Ensure surfaces are dry and smooth before paint application.

2. Primer Application

• Apply one coat of primer suitable for interior surfaces (preferably low-VOC).

• Primer type should match the finish paint (e.g., water-based primer for emulsion paints).

• Ensure proper curing time before topcoat application.

3. Painting Works

• Apply 2 coats of premium-quality interior emulsion paint (or as per client specifications).

• Paint material shall be washable and easy to maintain, suitable for high-traffic common areas like basements, lift lobbies, and corridors.

• Use roller/brush/spray based on area and accessibility.

• Finish should be smooth, uniform, and free of roller marks, streaks, or visible patches.

• Color selection as per design approval or as specified by the client.

4. Area Protection & Safety

• Cover floors, fixtures, doors, switchboards, and equipment with protective sheets.

• Ensure minimal disruption to ongoing building operations (coordinate timing with management).

• Follow all safety protocols, especially in enclosed basement areas (ventilation, PPE, fire safety).

5. Post-Painting Cleanup

• Remove all protective coverings.

• Clean paint drips and splatters.

• Dispose of paint waste and empty containers in compliance with local regulations.

6. Inspection and Touch-Ups

• Conduct joint inspection with the facility team or client representative.

• Perform touch-ups where needed for a consistent finish.

• Final sign-off upon client satisfaction.

Community: Yacht Bay Tower

Location: Marsa Street, Dubai Marina

Site Contact Person - Mr. Richard - 052 876 3594